Click image to view full size image
Carbon Steel Sigma Purlin Roll Forming Machine 15KW Hydraulic Station, Width 100-300mm
:Composition of machine
| Roll forming main machine | 1 unit |
| Un-coiler | 1 unit |
| PLC Control panel | 1 unit |
| Hydraulic station | 1 unit |
| cutting device | 1 unit |
| punching device | 1 unit |
| Safety cover device | 1 unit |
| Manual out table | 2 unit |
Main Specifications
| Coil Material | Thickness | 1.2-3.2mm |
| Coil width | Depend on customer’s requires | |
| Yield Strength | 250-350Mpa | |
| Material | GI. Carbon Steel | |
| Purlin Sizes | Web width | 100-300 |
| Height | 35-45 | |
| Lip | 15-25mm | |
| Decoiler / Uncoiler | Coil Width | Max. 600mm |
| I.D | 510-610mm | |
| O.D | Max. 1300mm | |
| Capability | Max. 5 Tons | |
| Decoiler type | Manual / Hydraulic/Automatic | |
| Feeding & Leveling | Pinch feeding | 3 Units ( 6 Rollers ) |
| Leveling | 7 Rollers ( Upper 3 Rollers, Bottom 4 Rollers ) | |
| Punching device | Punching motion | Hydraulic Punching, Post-punching |
| Punching dies | Cr12 Mov Steel, HRC58-62 | |
| Punching station | 1-6 Unites ( depend on hole patterns ) | |
| Punching in longitude controlled by PLC, punching at horizontal adjusted by manual hand wheel. | ||
| Cutting device | Cutting motion | Hydraulic Cutting, post-Cutting ( cutting sheet after forming ) |
| Cutting blades | Cr12Mov with heat treatment HRC58-62 | |
| Length Measuring | Automatic length measuring by encoder & PLC. | |
| Cutting Tolerance | +/-1.5mm(per 3m) |  Sell
New Login
Company QR code Anytime Anywhere Mobile |